USC-2
General
- USB 1.1 – 2.0 connection to PC
- realtime calculation of laser and scanner signals
- online grid correction with 10 µs cycle time
Laser control
- control signals for almost every type of laser
- optocoupler TTL level/10 mA output current
- 2 x 12 bit analog channels with 2.5 V, 5 V, 10 V output range
- 1 x 8 bit TTL level output port
Scanner control
- X, Y, Z channel
- XY2-100 digital interface
External control
- 6 opto-insulated inputs and outputs
- RS 232 interface
- encoder inputs for marking on the fly
Power
- +5 V / max. 1.6 A
Advanced:
- Ethernet connection to PC
- Flash option on board
- pins and size compatible to USC-1
- on board configuration setup
- additional scan head connector
- 64 MB DDR RAM
- 2 x 10 bit analog input channels
- additional 10 TTL level inputs and 10 TTL level outputs
- 6 outputs / 3 inputs TTL level to control stepper motors interface for controlling 3 axes
- additional differential encoder inputs for marking on the fly
- additional marking on the fly modes: buffered mode, rotation mode, analog mode
- pause function
- opto-insulated outputs with 80 mA output current
- battery buffered real time clock